Extreme Networks AltitudeTM 4522 Series Guide d'installation télécharger pdf (Page 14)

Wall Mount Procedure

Altitude™ 4522 Series Access Point Installation Guide

1 Orient the case on the wall by its width or length.

CAUTION

To ensure proper operation of an Altitude 4522 Access Point, ensure that it is mounted in the

correct orientation as shown above.

2 Mark two points (for drill holes) 4.08 inches (103.7 mm) apart on a horizontal line.

3 At each point, drill a hole in the wall, insert an anchor, screw into the anchor the wall

mounting screw and stop when there is 1mm between the screw head and the wall.

NOTE

When pre-drilling a hole, the recommended hole size is 2.8mm (0.11in.).

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 67 68

Pas de commentaire

Extreme Networks AltitudeTM 4522 Series Guide d'installation Page 14