Extreme Networks Altitude 4532 Series Guide d'installation télécharger pdf (Page 8)

Chapter 1: Introduction

Altitude™ 4532 Series Access Point Installation Guide

Features

●

One RJ-45 connector

●

LED indicators

●

Safety wire tie point

●

Slots for wall mounting

●

Clips for mounting on a suspended ceiling T-bar

●

Lock port for Kensington® style Security Lock

The Altitude 4532 Access Point has one RJ-45 connector supporting an 10/100/1000

Ethernet port and requires 802.3af-compliant power from an external source.

NOTE

When operating in a Gigabit Ethernet environment, CAT-5e or CAT-6 cable is recommended

for Gigabit operation.

The Altitude 4532 Access Point comes with dual radios both supporting 802.11a/b/g/n.

The Access Point contains runtime firmware which enables the unit to boot after a power

up or watchdog reset. The runtime firmware on the Access Point and the firmware

downloaded from the controller can be updated via the Ethernet interface from the Wireless

Controller.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 62 63

Pas de commentaire

Extreme Networks Altitude 4532 Series Guide d'installation Page 8