Extreme Networks Altitude 4532 Series Guide d'installation télécharger pdf (Page 5)

Altitude™ 4532 Series Access Point Installation Guide

CHAPTER

Introduction

The Altitude™ 4532 Access Point, a component of the Extreme Networks

Wireless

Mobility System, links wireless 802.11a/b/g/n devices to the Summit

WM3000 Series

Controller, enabling growth of your wireless network with a cost effective alternative to

standard Access Points. The Altitude 4532 Access Point provides two placement options:

wall and ceiling. Wall mount slots fit onto two provided screws. Arrows on the case guide

the placement of the screws. For placement above a suspended ceiling, a safety wire tie

point on the case provides for a safety wire loop. The light pipe fits through a hole in the

ceiling tile to provide a view of the unit’s status lights.

The Altitude 4532 Access Point receives all power and transfers data through the same

CAT-5 or better Ethernet cable. There is no additional power supply required. An 802.3af

Ethernet controller or Power Injector is required.

1 2 3 4 5 6 7 8 9 10 ... 62 63

Pas de commentaire

Extreme Networks Altitude 4532 Series Guide d'installation Page 5