Extreme Networks Summit WM Series Guide de l'utilisateur Page 219

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 228
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 218
Altitude 350-2 Integrated Antenna AP (15938), Altitude 350-2 Detachable Antenna AP (15939)
Summit WM-Series WLAN Switch and Altitude Access Point Software Version 1.0 User Guide
219
NOTE
A signed copy of the Declaration of Conformity (DoC) in accordance with the preceding directives and
standards has been made and is available at www.extremenetworks.com/go/rfcertification.htm.
Conditions of Use in the European Community
The Altitude 350-2 wireless access point with integrated and detachable antennas is designed and
intended to be used indoors. Some EU countries allow outdoor operation with limitations and
restrictions, which are described in this section. If the end user chooses to operate the Altitude 350-2
outdoors, it is their responsibility to insure operation in accordance with these rules, frequencies, and
power output. The Altitude 350-2 must not be operated until proper regional software is downloaded.
WARNING!
The user or installer is responsible to ensure that he Altitude 350-2 is operated according to channel
limitations, indoor / outdoor restrictions, license requirements, and within power level limits for the
current country of operation. A configuration utility has been provided with the switch to allow the end
user to check the configuration and make necessary configuration changes to ensure proper operation
in accordance with the spectrum usage rules for compliance with the European R&TTE directive 1999/
5/EC. See the switch software guide for detailed instructions on use of this utility.
The Altitude 350-2 wireless access point with integrated and detachable antennas are designed to be
operated only indoors within all countries of the European Community. Some countries require limited
channels of operation for indoor use. These restrictions are described in this section. For the most up
to date restriction and limitations go to www.extremenetworks.com/go/rfcertification.htm.
NOTE
The Altitude 350-2 is completely configured and managed by the Summit WM-Series switch connected
to the network Please follow the instructions in this software user guide to properly configure the
Altitude 350-2.
Environmental
EN/ETSI 300 019-2-1 v2.1.2 - Class 1.2 Storage
EN/ETSI 300 019-2-2 v2.1.2 - Class 2.3 Transportation
EN/ETSI 300 019-2-3 v2.1.2 - Class 3.1e Operational
ASTM D5276 Drop Packaged
ASTM D3580 Random Vibration Unpackaged 1.5 G
Table 12: European Conformance Standards (Continued)
Vue de la page 218
1 2 ... 214 215 216 217 218 219 220 221 222 223 224 ... 227 228

Commentaires sur ces manuels

Pas de commentaire