Extreme Networks Summit WM Series Manuel d'utilisateur télécharger pdf (Page 15)

PN: 72-9958-00-A.doc Page 15

Wireless APs Address Assignment

1. After all the APs have been connected and discovered by the controller, go to the

Altitude™ APs tab and select Static Configuration. Select an AP to configure. The AP’s name

will default to their MAC address.

2. Under IP Address Assignment select either Use DHCP or Static Values. If selecting Static Values,

assign the proper values.

3. Under Summit™ Switch Search List add the IP address of the controller port.

4. Repeat steps 4 and 5 for each access point.

5. Save your settings using the Save button.

1 2 ... 10 11 12 13 14 15 16 17 18

Pas de commentaire

Extreme Networks Summit WM Series Manuel d'utilisateur Page 15