Extreme Networks Sentriant AG Guide d'installation télécharger pdf (Page 18)

Startup and Configuration

Sentriant AG200 Hardware Installation Guide

5 Select Yes to save the changes or No to discard the changes.

A confirmation message is displayed for either action. If you save the changes, you must reboot the

system for the changes to take effect.

To perform the initial setup process, see the next section.

Performing the Initial Setup

After you have changed the default password, perform the initial setup. The initial setup includes the

following tasks:

● Configure network settings (see the next section, “Configuring Network Settings.”

● Set the time, date, and time zone (see “Setting the Time, Date, and Time Zone” on page 19.

● Set the operation mode (personality) of the Sentriant AG appliance (see “Setting the Operation Mode

of the Server” on page 22).

You can configure each of these and save the changes before you reboot the system to activate all the

changes at one time.

At the system prompt, enter the following command:

Sentriant AG200(sentriantAG):~ #cosetup

The main configuration menu is displayed.

Configuring Network Settings

To configure network settings:

1 Highlight Configure Network Settings and select OK.

2 Press [Enter].

The network settings menu is displayed.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 39 40

Pas de commentaire

Extreme Networks Sentriant AG Guide d'installation Page 18