Extreme Networks Policy Manager Guide de l'utilisateur télécharger pdf (Page 31)

Opening an Existing Policy

Extreme Networks Policy Manager (EPM) 1.2 User Guide

Opening a Policy File from a Switch

1 Ensure that your TFTP server is open.

2 From the EPM menu, choose File > Open > Switch. An Operation Progress box is displayed

followed by a Remote Switch Dialog box as shown below.

3 Enter the following information, completing all four fields. Leaving a field blank does not result in

default behavior.

a The IP Address of the switch to which you want to connect

b The Virtual Router on which the SSH server traffic is routed

c The Admin Login ID

d The associated Admin Password

Then click OK. An Operation Progress box is displayed showing that the connection to and from

the switch is being checked.

NOTE

The EPM remembers the Remote Switch Dialog settings after they have been entered and the connection is

successful.

4 When there is a problem with the connection, the following box is displayed.

Check the suggested reasons and make the necessary adjustments. For additional information, refer

to “Configuring the EPM for use on a Switch” on page 18.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 81 82

Pas de commentaire

Extreme Networks Policy Manager Guide de l'utilisateur Page 31