Extreme Networks ExtremeWare XOS Command Spécifications Page 152

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 370
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 151
152 ExtremeWare XOS 11.0 Concepts Guide
Security
Along with the data types described in Table 29, you can use the operators <, <=, >, and >= to specify
match conditions. For example, the match condition,
source-port >190, will match packets with a
source port greater than 190.
ICMP-code <number> ICMP code field. This value or keyword provides more specific
information than the icmp-type. Because the value's meaning
depends upon the associated icmp-type, you must specify the
icmp-type along with the icmp-code. In place of the numeric
value, you can specify one of the following text synonyms (the
field values also listed); the keywords are grouped by the ICMP
type with which they are associated:
Parameter-problem:
ip-header-bad(0), required-option-missing(1)
Redirect:
redirect-for-host (1), redirect-for-network (2),
redirect-for-tos-and-host (3), redirect-for-tos-and-net (2)
Time-exceeded:
ttl-eq-zero-during-reassembly(1), ttl-eq-zero-during-transit(0)
Unreachable:
communication-prohibited-by-filtering(13),
destination-host-prohibited(10), destination-host-unknown(7),
destination-network-prohibited(9),
destination-network-unknown(6), fragmentation-needed(4),
host-precedence-violation(14), host-unreachable(1),
host-unreachable-for-TOS(12), network-unreachable(0),
network-unreachable-for-TOS(11), port-unreachable(3),
precedence-cutoff-in-effect(15), protocol-unreachable(2),
source-host-isolated(8), source-route-failed(5)
ICMP
Table 29: ACL match condition data types
Condition Data Type Description
prefix IP source and destination address prefixes. To specify the address prefix, use the
notation prefix/prefix-length. For a host address, prefix-length should be set
to 32.
number Numeric value, such as TCP or UDP source and destination port number, IP protocol
number.
range A range of numeric values. To specify the numeric range, use the notation:
number - number
bit-field Used to match specific bits in an IP packet, such as TCP flags and the fragment flag.
mac-address 6-byte hardware address.
Table 28: ACL match conditions (continued)
Match Conditions Description
Applicable
IP Protocols
Vue de la page 151
1 2 ... 147 148 149 150 151 152 153 154 155 156 157 ... 369 370

Commentaires sur ces manuels

Pas de commentaire