Extreme Networks WM-4T1i Spécifications télécharger pdf (Page 139)

Removing the Chassis

Extreme Networks Consolidated Hardware Guide 139

• # 1 Phillips screwdriver

• A minimum of two people to help remove the chassis from the rack

To remove the Alpine 3800 series chassis from a standard 19-inch (48.26 cm) rack:

1 Unplug the power cable from the outlet and then from the switch before you attempt to remove the

chassis components and the chassis from the rack.

2 Mount the helper bracket in the rack directly beneath the chassis using four screws that are

appropriate for your rack.

3 To reduce weight and prevent possible equipment damage, use a # 1 Phillips screwdriver to remove

the:

• Power supply, SMMi, and I/O modules from the Alpine 3808 and Alpine 3804.

• I/O modules from the Alpine 3802.

For information about removing power supplies, see Chapter 8.

For information about removing the SMMi, see Chapter 9.

For information about removing I/O modules, see Chapter 10.

4 Unscrew the chassis from the rack.

5 Have a minimum of two people gently remove the chassis from the rack and place it on a secure, flat

surface with the front of the chassis facing you.

6 Unscrew the helper bracket and remove it from the rack.

1 2 ... 134 135 136 137 138 139 140 141 142 143 144 ... 335 336

Pas de commentaire

Extreme Networks WM-4T1i Spécifications Page 139